Paper Making Machine Alumina Ceramic Sand Blasting Nozzle

Application: Papermaking Equipment
Type: Alumina Ceramic Nozzle
Material: Alumina Ceramic
Transport Package: Wooden Box
Specification: customizable
Trademark: QIJING

Products Details

Basic Info.

Model NO.
400L
Origin
Shandong
HS Code
8421199090
Production Capacity
50000 Pieces a Year

Product Description

    Qijing Trading Co., Ltd. main business: industrial ceramics, refractory materials, corundum wear-resistant ceramics, papermaking equipment and accessories, pulping equipment and accessories, papermaking dewatering equipment and accessories, pulping equipment and accessories, papermaking dewatering equipment and accessories, slag removal Equipment and accessories, wear-resistant pipes, mining equipment and accessories, alumina ceramic parts, thermocouple protection tubes, special-shaped fittings, pipe liner patch, pipe liner pipe, wear-resistant refractory ceramic parts, elbows, tees , Production and sales of electronic insulation materials.

     Customer first, quality first! Your satisfaction is our unremitting pursuit! As long as you request, we will complete the rest. Qi Jing Trading goes hand in hand with you to create brilliant!
   


Paper Making Machine Alumina Ceramic Sand Blasting Nozzle

Basic parameters
Alias Slag remover Material Alumina ceramic Origin China
Types of Pulping use Purified pulp Types of air purification equipment for purifying pulp Slag remover
Brand Qijing model   Various can be customized HS code 842199090

 
Paper Making Machine Alumina Ceramic Sand Blasting Nozzle

  
Product deion

 Cleaner is based on differences in the slurry contained in the relative weight of impurities using centrifugal principle to remove its new generation of products, the product is in use on the basis of the first generation of products, according to domestic and international users feedback, designed to address the problem of slag mills designed products. The product can greatly reduce the need to adjust the structure according to the user to achieve the purpose of each individual light and heavy impurities separation, separation of heavy impurities together, allowing users one-time investment. The product is separable heavy impurities gravel, iron, paint and other heavy mixtures. Light impurities plastic sheets, foams, gases, ink, dust or the like.


 
Material:                    Alumina Ceramic Shape: Cone-shaped Tube
Temperature: <1700ºC Compressive Strength: ≥620Mpa
Type: Ceramic Tubes Usage: Wear-resisting Material
Bulk Density: ≥ 3.65 G/cm3 Flexural Strength: ≥610Mpa
Application: Industrial Ceramic Specific Resistivity: ≥1015Ω/cm/100ºC 
Max OD: 760mm    

PACKING

Paper Making Machine Alumina Ceramic Sand Blasting Nozzle


Transport and installation precautions:

Matters needing attention for transportation and installation of ceramic pipe
1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.

2. The qijing bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.

3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.

4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.

5. When using flange connection, the flange end shall be flush with the end of the composite pipe.

6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.





FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 15 days if the mould sizes are in stock. or it is 25 days if the mould sizes are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the stock sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: For new customers, 100% T/T in advance. For  regular customers, 30% T/T in advance ,balance after received the B/L copy




 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours